ADVANCED LATHE TOOLS, LLC
BORING BAR NOSE SUPPORTS
© 2017 Advanced Lathe Tools, LLC
If you have two banjos, or for any other reason do not need a nose support, we offer a boring tool rest, which will fit a standard 1" post banjo. Let us know what lathe it will be used on, and we'll cut the post to the correct length for you.
alt2017005014.jpg alt2017005013.jpg alt2017005012.jpg alt2017005011.jpg alt2017005010.jpg alt2017005009.jpg alt2017005008.jpg alt2017005007.jpg alt2017005006.jpg alt2017005005.jpg alt2017005004.jpg alt2017005003.jpg alt2017005002.jpg
Advanced Lathe Tools boring bar nose support system allows use of your latheís banjo to support the boring barís trap by providing alternative support for the tool rest. No need to purchase a second expensive banjo. The system can be used for other purposes, but has a limited range of horizontal motion, and is not designed to be moved frequently like a banjo. Included shaft collar maintains height adjustment and absorbs vertical forces. The guide pin arrests those annoying horizontal oscillations common to other systems, and allows full control.
Strong, vibration-free support.
Special tool rest with two position guide pin included.
NOTE:
Advanced Lathe Tools Boring Bar Support Systems Height Ranges (top of rest):
Allow for the thickness of the boring bar. Cutters generally are mounted on the center of the diameter or thickness of the bar.
(10" - 11" swing)
(11" - 16" swing)
(17" - 25" swing)
4 1/4" - 5 5/8"
5 1/8" - 7 7/8"
7 3/4" - 13"
Small
Medium
Large
PROFESSIONAL QUALITY
alt2017005001.jpg